■ Laboratory glove boxYK-STX-300 ，The utility model relates to an equipment providing an anhydrous and oxygen-free environment. The equipment is mainly composed of a display system, a transition chamber, a vacuum system, a control system, a box, a recycling purification and regeneration system, etc., and can also be used respectively with a gas purification system, a solvent filtration system, and a water oxygen display
Laboratory glove box |
YK-STX-300 |
|
Closed case |
SUS304 stainless steel plate, single section L1200 ×H900 ×W1050 mm, thickness 3mm |
|
Large transition chamber |
SUS304 stainless steel type, thickness 3mm, diameter 360mm, length 600mm |
|
Small transition tank |
SUS304 stainless steel plate, thickness 3mm, diameter 100mm, length 300mm |
|
Purification system |
SUS304 stainless steel, renewable purification material |
|
Circulating duct |
SUS304 stainless steel, KF40 tube |
|
Glove opening |
Duralumin |
|
Illumination |
There are fluorescent lights in the front window |
|
Pressure control |
PLC automatic control, the working pressure can be set at ±12mbar |
|
Adsorption device |
SUS304 stainless steel plate, updatable fill purification material, water, oxygen control at <1ppm |
|
Design absorption capacity of purification column |
Water 1.3 kilograms, oxygen 30 liters |
|
Loop |
Oil and vacuum free, microprocessor-controlled, pressure tested stainless steel unit |
|
regeneration |
Automatic regeneration program |
|
Working gas |
Nitrogen, argon, helium |
|
Regenerated gas |
Working gas /H2 mixture, 5-10% hydrogen |
|
Vacuum pump |
Original vacuum pump with flow rate of 8m3/h |
|
Power source |
AC220V / 50HZ |
|
