■ Injection machineYK-ZY-300 ，This machine adopts clamping fixture, by human tooling up and down the battery, automatic pull air bag, automatic liquid injection, automatic vacuum static absorption, heating sealing, feeding weighing sorting. Manually place the battery cell into the fixture, make the air bag mouth face up into the fixture, and collapse the foot pedal;
■ The fixture group drives the battery after liquid injection to automatically shift to the vacuum static absorption (the vacuum static absorption can adjust the time, vacuum pressure, absorption times), after the static absorption is completed, the battery is automatically sealed in the vacuum state, the fixture is automatically returned after the sealing is finished, and the battery is manually removed after the seal is installed again.
● High reliability ● Intelligentize
■ Anti-pollution, using rotary spool structure design, no dynamic sealing ring, easy to clean and maintain simple, can be used for aseptic filling, to meet the food, pharmaceutical and other industrial requirements
■ Corrosion resistance, special high wear-resistant ceramic pump head, long life design, the key parts are imported components, strong corrosion resistance, reliable and durable
■ Liquid storage system: equipped with a set of electrolyte automatic liquid supply, storage, injection, constant pressure system, cycle switching use,
in the case of no liquid in the electrolyte tank with alarm warning function.
■ Anti-card system: equipped with a set of injection pump autobiography system, can be used for a long time when the injection pump according to the predetermined time autobiography (duration can be set), and the needle does not drip,
to prevent the electrolyte crystallization caused by the injection pump stuck.
■ Power off to maintain function: the absorption box can maintain the state of pressure under power off, (can prevent the cylinder from blowing up the box after the pressure is too large in the upper box after the power is cut off) After the power is restored,
the whole system can automatically detect what state can be run before the power off.
■ Connection MES: LAN/WIFI network interface, a variety of database MES connection schemes;
■ The product is a process in which the electrolyte (lithium hexafluorophosphate, etc.) is injected into the battery in accordance with the required amount through the reserved injection hole, which is divided into primary injection and secondary injection.
Injection machine |
YK-ZY-300 |
|
Body size |
1200*960*1800mm(L*W*H) |
|
weight |
0.8 T |
|
power |
2.5KW |
|
Power source |
AC220V/50HZ |
|
Air source |
≥0.7Mpa，10L /S |
|
Vacuum source |
≤-95Kpa 10L/S |
|
Injection volume |
≤1500g |
|
Efficiency |
3ppm（According to the actual calculation of liquid injection amount and sealing time） |
|
