■ Negative pressure forming machineYK-L64D-5V100A系列，It consists of 1 set of forming power cabinet (5V30A,32 points), 2 sets of needle bed fixture sets (16 points/set) and 1 set of negative pressure vacuum system (2 layers, each layer 2 pipes with diameter of 32mm, 32 points, each single pipe diameter of 16mm, fluorine rubber anticorrosive sucker); (Power supply and fixture group are placed separately).
■ Series of products with protection functions :1) data abnormal recovery; 2) Software over voltage, under voltage, over current, under current, over capacity protection 3) The range of voltage and current protection value can be set, which can be prompted and recorded after protection; 4) Set high alarm light, prompt state; 5) Set emergency stop button, emergency stop fixture automatically open; 6) Installed with smoke alarm, when the smoke alarm occurs, the machine stops running and alarms; 7) After the equipment alarm stops, the unfinished process can be continued from the interrupted position, without starting the process from scratch; 8) If the communication between the lower computer and the upper computer is interrupted, the work can continue according to the original process after the communication is restored to normal; 9) When the equipment is abnormally powered off, the current process can continue; 10) When the time communication is interrupted or the PC is faulty, the device will automatically enter the waiting state, and the current process will continue after the communication is quickly reset.
● Intelligentize
■
The software supports a variety of renewals, such as manual pause renewal, software shutdown renewal, power interruption renewal, equipment communication interruption renewal, abnormal stop renewal;
■ Support bar code scanning, one-dimensional code, two-dimensional code scanning, there are sequential scanning code, channel skip scanning code, plate scanning code;
■ Support capacity sorting, can be the battery grade sorting;
■ The Pass/NG result can be judged according to the specified cycle capacity, voltage, and time.
■ Support a variety of work step protection and global voltage, current, temperature abnormal protection, and abnormal alarm;
Support database server background storage or MES connection; Software offline protection; Software is available as a free upgrade.
■ It is used for the formation of hard shell lithium-ion batteries under negative pressure (negative 10-95), and the air in the battery formation is extracted by vacuum, while the formation time is shortened and the battery production cycle is reduced.
Negative pressure forming machine |
YK-L64D-5V100A |
|
Equipment ADAPTS to cell specifications |
≤ Length A: 60 ~ 500mm; Width B: 60 ~ 250mm; Thickness T: 5 ~ 20mm. Pole ear width: 10 ~ 120mm; Pole ear center distance: 20 ~ 180mm; Pole ear length ≤20mm. |
|
Charging voltage setting range |
DC 0～5V |
|
Discharge voltage setting range |
DC 5～0.7V |
|
Charge and discharge current setting range |
DC 0.05～100A |
|
Voltage accuracy |
±（0.05%RD+0.05%FS） |
|
Current accuracy |
±（0.05%RD+0.05%FS） |
|
Voltage resolution |
1mV |
|
Continuous working time |
Equipment power should meet all channels can be full load, 365*24 hours uninterrupted operation |
|
