■ Ultrasonic welding machine YK-DH-6000，The principle of the equipment is that the transducer converts the ultrasonic high-power oscillation signal into the mechanical energy of the corresponding frequency, and applies it to the interface of the metal sheet that needs to be fused, so that the metal sheet instantaneously generates heat, and then the particles in the metal lattice start, so that the molecules in the metal sheet are interpenetrated and fused together to complete the welding.
■ Series products adopt intelligent ICS chassis control system with secondary ultrasonic function; System boot self-test, vibration sub-intelligent segmentation, automatic tracking, to provide on-machine signal transmission function. The mechanical structure of the machine head adopts German X guide rail structure with high precision.
■ The series products adopt advanced constant current and constant voltage circuit technology, and the ultrasonic amplitude is continuously adjustable. With voltage protection system (supply voltage range 220V ~ 250V); It does not affect the output power and working frequency of the machine during the automatic voltage leveling
● High reliability ● intelligentize
■ With overload protection system
■ Has overcurrent protection
■ With power supply frequency instability automatic compensation
■ Welding overload protection signal feedback
■ Computer data monitoring and data uploading
■ Intelligent ICS system: intelligent chip digital circuit, high-density integrated central processing system, millisecond level of sampling control.
■ System boot self-test, automatic frequency search, welding head replacement or mold repair, the system does not need to be re-calibrated.
■ 7 inch HD touch screen, intuitive chart operation interface.
■ The welding effect of each time is presented by high-definition human-machine exchange touch screen through data, and the welding process is displayed in curve.
■ Each welding data can be transmitted to the monitoring computer, so that the welding data can be traced and the defective rate can be reduced.
■ Multiple levels of password protection can be configured to separate the debug interface for managers from the operator's interface.
■ The product is used for welding between aluminum foil of positive electrode of soft pack lithium ion battery, welding between positive electrode ear and aluminum foil.
Ultrasonic welding machine |
YK-DH-6000 |
|
Electrode welding method |
Horizontal/vertical, need to determine before ordering |
|
Solder joint length |
18-36mm |
|
Solder joint width |
3mm |
|
Solder joint depth |
0.1-0.6mm |
|
Welding time |
Within 1S |
|
Head material |
Imported high speed steel |
|
Face life |
≥ 100,000 times |
|
Production efficiency |
Approx. 25PPM (depending on manual proficiency and number of pole layers) |
|
